The procedure described below is very nice.
But how do I make it work on the second radio?
The ALT-D command seems to expect only a
call sign and will not show any multiplier info
on second radio.
Another issue:
How do I make the Mults Need window to update?
If I enter the call and make a dupe check with SPACE
the QSO Needs window is updated but not the Mults Need
window. If I press ENTER the Mults Need will be updated.
It would be nice if Mults Need was updated when one step
earlier when pressing space.
73 de Ingo, SM5AJV / 8S5A
(8S5X in the ARRL DX Contest CW 2003)
----- Original Message -----
From: "George Fremin III - K5TR" <geoiii@kkn.net>
To: "Toni Linden" <oh2jte@luukku.com>
Cc: <trlog@contesting.com>
Sent: Saturday, February 01, 2003 5:08 PM
Subject: Re: VS: [Trlog] Multiplier chk
> On Sat, Feb 01, 2003 at 05:38:16PM -0000, Toni Linden wrote:
> >
> > but unfortunatly if I try that, the TR shows me
> > that I?m missing Portugal as multiplier.
>
> Yes youare correct - if you hit the space bar or enter.
>
> But if you just type the state CT in the call window
> without hitting anything it will show you
> the mult needs for that mult.
>
>
|