TR PORTS seems to report the standard ports for any PC. I verfied that the
laptop was using what was expected for com 1. This is a W2K laptop that I
am booting from a "Emergency Recovery" disk created by my WIN98 PC. The PC
seems to work with an older version of TRLOG (659) except that you can not
"send" the band changes to the 930, only receive what the 930 reports.
Again, the laptop doesn't work at all.
Rich - Wn0x
> It is very likely the port assignments are different under DOS. Run " TR
> PORTS" to see what ports are available. You might simply have to choose
> a different port. You can make windows use the same port number by using
> device manager and keep windows from automatically assigning ports. If
> you need help with this let me know.
>
> Rich Beckwith wrote:
> >
> > I have only tried it with one transceiver, the TS930 with the PIEXX. I
had
> > hoped another IBM T21 laptop owner could verify operation. The thing I
> > can't figure out is why it will work from the windows environment on the
> > SAME laptop but not from TRLog in the DOS environment.
> >
> > Rich
> >
> > > At 12:02 PM 11/9/02 -0600, you wrote:
> > > >Yep, it was the first thing I tried. Works with the RCP program just
> > fine.
> > > >Works from a terminal program just fine. TRLog, doesn't work.
> > >
> > > So you're saying TR doesn't work with any transceiver that you've
tried,
> > > from this computer. That suggests it's something about TR and this
> > > computer, doesn't it?
> > > Have you tried using a different serial port? I assume it only has
two,
> > > probably (or maybe just one).
> > >
> > > 73, Pete N4ZR
> > >
> >
> > _______________________________________________
> > TRLog mailing list
> > TRLog@contesting.com
> > http://lists.contesting.com/mailman/listinfo/trlog
>
> --
> 73 es God Bless de KK1L...ron (kk1l@arrl.net) <><
> QTH: Jericho, Vermont
> My page: http://www.qsl.net/kk1l
|