Did you define the relay control port in LOGCFG.DAT?
RELAY CONTROL PORT = 1 sets LPT1 as the port using pin 14 to toggle the radios.
--
73 es God Bless de KK1L...ron rossi(kk1l@arrl.net) <><
Support Programmer for TRLog http://www.qth.com/tr
QTH: Jericho, Vermont
My page: http://www.qsl.net/kk1l
>>>Ron Feutz said:
> TRLoggers,
>
> I have most everything working now, except the computer doesn't switch the
> transmitter in auto mode (on the DXD).
> I am using QSK, in case that makes a difference, but Dave at TopTen has
> told me that QSK is transparent to the DXD box, so I am assuming that PTT
> has nothing to do with it.
>
> All control functions work fine, including qsy in s & p on the FT990 (radio 2
).
>
> When I select rig 2 on the computer, all info for rig two comes properly,
> but the TX light (and the keying signal) on the DXD box stays with rig one.
>
> Any ideas?
>
> Ron - WA9IRV
>
>
> _______________________________________________
> TRLog mailing list
> TRLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/trlog
>
|