I had some fun last night on 80 CW. I was using parallel port keying and the
modem connection (for Telnet) timed out. The resulting message window
interrupted TR and locked the keyer in a steady tone while I was working a KH6.
Had to rush to kill break-in mode and then I got TR reset. It's the only
hazard of running TR with lots of other windows open. I like the ability to
keep TR open while check Geoclock, Telnet, and DX Summit. The only time I run
TR solely in DOS is in an intensive contest like SS where I only come up for
air and nothing else.
=*=* ==*= =** =**= =** * =*= =**** =*= =*== *===
Ron Angle, Chico CA
73 de K6KYJ [From the Land of the Seven Dipoles]
Former op at BV1US and KL7FAR in the Good Old Days
-----Original Message-----
From: Pete Smith [SMTP:n4zr@contesting.com]
Sent: Sunday, May 26, 2002 7:19 AM
To: Cal Kutemeier; trlog@contesting.com
Subject: Re: [TRLog] Knwd 570 CW interface and config file
Cal, I don't know about keying through the serial port, but CW works fine in
a DOS window under 98SE if you use parallel port keying. On my slow PC I've
found that you need to shut down background tasks to avoid some occasional
"slurring" of the CW though.
73, Pete N4ZR
----- Original Message -----
From: "Cal Kutemeier" <ckuter@ix.netcom.com>
To: <trlog@contesting.com>
Sent: Saturday, May 25, 2002 7:28 PM
Subject: [TRLog] Knwd 570 CW interface and config file
> Thanks to everyone who responded. there were 2 problems. 1) The
collector
> and base were touching in my cable. 2) It works only if I reboot W98 in
DOS
> mode, not with a MSDOS window within W98.
>
>
>
> _______________________________________________
> TRLog mailing list
> TRLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/trlog
_______________________________________________
TRLog mailing list
TRLog@contesting.com
http://lists.contesting.com/mailman/listinfo/trlog
|