In a past post about TRLog not able to increment outgoing serial
numbers I mentioned this:
"On a good note the log checking software doesn't seem to care. "
Checking the WPX web site for any rule changes, http://home.woh.rr.com/wpx/
I see now that they do care:
"It is very important that your log indicates the correct serial number sent."
One thing Steve did to help all the logging programs was to allow
Multi-single to use separate numbers by band:
"If you are using TRlog select the QSO NUMBER BY BAND option."
This will help a lot for the m/s serial number problem especially now that
the WPX rules for M/S are the same as the WW M/S.
73 Rich KL7RA
|