SOLVED....
Yes...Tree reminded me that this was probably that EIGHT BIT PACKET PORT
thing..
Changed it and it's working...thanks all who helped.
Larry, N0XB
At 05:05 PM 03/01/2002 -0500, Barry Martz wrote:
>Using old KAM here and have never had any problems.
>I have the following:
>PACKET PORT = SERIAL 3
>EIGHT BIT PACKET PORT = TRUE
>PACKET BAUD RATE = 4800
>PACKET BEEP = FALSE
>PACKET SPORTS = ALL
>PACKET SPOT EDIT ENABLE = FALSE
>PACKET RETURN PER MINUTE = 5
>
>de Barry/K8BK
>
>----- Original Message -----
>From: "Larry Menzel" <retire@rconnect.com>
>To: <trlog@contesting.com>
>Sent: Friday, March 01, 2002 3:24 PM
>Subject: [TRLog] Kantronics Issue???
>
>
> > Hello listers:
> >
> > I spoke both with George and with Kantronics on the issue of one way
> > communications from my KPC 3 to Trlog and back.
> >
> > First: Will someone who is using a KPC 3 with Trlog please email me with
> > the parameters they are using to make it work?
> > Second: Kantronics tech support says the KPC 3 is looking or a <CR> ONLY
>at
> > the end of a line, and I see no switches in
> > Trlog that enable just a CR at the end of a line. I see LF but the TNC is
> > not looking for that.
> >
> > Does enabling a LF at the end of the line turn off a CR?
> >
> > My KPC 3 works fine with every other program including hyperterm.
> > Tree...what's up? Any suggestions?
> >
> >
> > Bamboozled, again.
> >
> > Contest starts in 3.70 hours...help.
> >
> > Larry, N0XB
> >
> > _______________________________________________
> > TRLog mailing list
> > TRLog@contesting.com
> > http://lists.contesting.com/mailman/listinfo/trlog
>
>_______________________________________________
>TRLog mailing list
>TRLog@contesting.com
>http://lists.contesting.com/mailman/listinfo/trlog
|