On 10 Jan 2002 at 14:23, kl7ra wrote:
>
>
> I also noticed the PTT is not enabled when DVK is used. I have
> the voice keyer PTT run the radio but I was hoping to use the
> delay feature. This would allow the relays to lock up in the home brew
> amps before the DVK pulse went positive.
>
> I would vote to add it unless I missed something in the setup as well.
>
> >voice keyer (Speech Master) calling CQ from pin 3. I have PTT working
> >fine when operating CW, or with the footswitch What I don't have is
> >PTT output in conjunction with the voice keyer.
> > In a single mode contest, or on the low bands, I can work around
> >this. What I was hoping to do, was to
> >make the station as "Fool Resistant" as possable for VHF Contests. My
> >goal was to have that single point PTT output from TR, key a
> >sequencer, therby protecting preamps and relays.
> > I've read all the .CFG commands and I don't see any way to enable
> >PTT that is related to pin 3.
>
TR can't manage PTT because it does not know when the DVK message is over.
See Tree's post of 04-Sep-2001:
>
> >
> > I think the problem is that TR doesn´t know when my SSB message
> > ends, so it stays on "inactive" radio untill I transmit again
> > to "active" radio something via keyboard.
>
> That is probably exactly the problem.
>
> I have used TR on SSB with two radios with the DVP. It has the
> ability to tell me when it is busy sending and when it is done.
>
> The DVKs do not have that feature.
>
> Currently, I don't know any way to work around this.
>
> Tree
>
--
73, Udo
dl2zav@darc.de
Ich funke mit TR-Log von N6TR:
http://www.trlog.onlinehome.de
--
FAQ on WWW: http://www.contesting.com/FAQ/trlog
Submissions: trlog@contesting.com
Administrative requests: trlog-REQUEST@contesting.com
Problems: owner-trlog@contesting.com
Feature Wishlist: http://web.jzap.com/n6tr/trwish.html
|