I ran into something new (to me) using SBDVP with TR 6.59 this weekend.
I stored my call, with a second set of phonetics, in the EXF2.DVP file.
This was in addition to the MYCALL.DVP message that plays back from F1 in
S&P mode. My S&P exchange was stored in the SAPEXCHG.DVP file.
Messages from all three locations played back fine, individually. However,
if I used the EXF2.DVP message during a QSO sequence, the SAPEXCHG.DVP
message would not play back when I pressed [ENTER} to log the QSO and send
the other station's exchange. If I used MYCALL.DVP twice instead, the
exchange would play fine when asked for.
Since EXF2.DVP and the S&P F2 key are normally used for the full contest
exchange, it occurred to me that perhaps something internal to TRLog
"thought" that I had already sent the exchange once, and automatically
prevented resending it, even though the exchange is stored under a
different filename.
Is this the case? Is this maybe a leftover from the way the program works
in CW mode? Obviously, it's no biggie, but if so it probably should be
documented.
73, Pete N4ZR
--
FAQ on WWW: http://www.contesting.com/FAQ/trlog
Submissions: trlog@contesting.com
Administrative requests: trlog-REQUEST@contesting.com
Problems: owner-trlog@contesting.com
Feature Wishlist: http://web.jzap.com/n6tr/trwish.html
|