Is there a code that TR could (or already does) use as an "escape" to
send in front of it's own control codes (including the escape code)?
73, Guy.
--- 00tlzivney@bsuvc.bsu.edu wrote:
>
> From: BSUVC::00TLZIVNEY "Terry L. Zivney" 21-SEP-2001 19:28:43.99
> To: IN%"trlog@contesting.com"
> CC: IN%"n4zr@contesting.com",00TLZIVNEY
> Subj: Embedded Hex Codes - a partial solution
>
> Thanks to Pete, N4ZR, I found a partial solution to my
> dilemna about the embedded hex code feature of 6.59.
> In my example posted earlier, Pete noted that the code <04>
> was used twice - once by TR to mark the end of the string.
> Unfortunately, <04> is a legitimate code, in my case the
> ICOM rig ID is 04. TR apparently truncates the message at the
> first <04>, which results in no message going out. I was able
> to change the address at the rig to <05> and solve that problem.
>
> However, <04> is still a valid hex code. It is also used,
> for example, to select the 500 Hz cw filter. This means I
> can select SSB filters but not the main CW filter with TRLog,
> as things now stand.
>
> Terry Zivney, N4TZ/9
>
> --
> FAQ on WWW: http://www.contesting.com/FAQ/trlog
> Submissions: trlog@contesting.com
> Administrative requests: trlog-REQUEST@contesting.com
> Problems: owner-trlog@contesting.com
> Feature Wishlist: http://web.jzap.com/n6tr/trwish.html
>
>
>
=====
73 & GL
-----------------
Guy Olinger, K2AV
k2av@contesting.com
Apex, NC, USA
__________________________________________________
Do You Yahoo!?
Get email alerts & NEW webcam video instant messaging with Yahoo! Messenger.
http://im.yahoo.com
--
FAQ on WWW: http://www.contesting.com/FAQ/trlog
Submissions: trlog@contesting.com
Administrative requests: trlog-REQUEST@contesting.com
Problems: owner-trlog@contesting.com
Feature Wishlist: http://web.jzap.com/n6tr/trwish.html
|