Floyd,
Nothing obviously wrong here... If you got it working one way, the baud rate
and rig connection must be correct. I'd trace the circuit path from rig to
confuzer.
Question: which circuit? I have two of them posted that work with the '706.
Hint: do you have proper supply voltages on the op-amp? I've had one-way
communications problems when one supply was open.
73 de Bob, K6XX
k6xx@arrl.net
-----Original Message-----
From: owner-trlog@contesting.com [mailto:owner-trlog@contesting.com]On
Behalf Of Floyd Smithberg
Sent: Friday, March 16, 2001 1:24 PM
To: List TR-LOG
Subject: [TRLog] IC-706 interface
Making a HB interface for TR656+/486TP to IC706MKIIG using K6XX
cct...getting one way communication...rig follows the computer but no
control from the rig....
TR logcfg: Radio one type = IC-706
Radio one receiver address = 78
Radio one baud rate = 4800
Radio one name = IC-706
IC-706: 34 CI-V address 4EH
35 CI-V Baud AUTO
36 CI-V TRN OFF
37 CI-V 731 OFF
CI-V Stereo Plug to rig is wired: tip = CI-V signal
ring = n/c
body = gnd
Would appreciate any suggestions......TIA
73 Floyd NQ7X Phoenix,AZ ScQRPion DM33uq
--
FAQ on WWW: http://www.contesting.com/FAQ/trlog
Submissions: trlog@contesting.com
Administrative requests: trlog-REQUEST@contesting.com
Problems: owner-trlog@contesting.com
Feature Wishlist: http://web.jzap.com/n6tr/trwish.html
--
FAQ on WWW: http://www.contesting.com/FAQ/trlog
Submissions: trlog@contesting.com
Administrative requests: trlog-REQUEST@contesting.com
Problems: owner-trlog@contesting.com
Feature Wishlist: http://web.jzap.com/n6tr/trwish.html
|