I cannot do that because my interface is already connected to the serial
port and I am not about to change it for the one program that would need it.
I did measure the voltage on the SERIAL port 2 (started with -s2) and it
does not change during transmission. I cannot use VOX because I need to have
the rig blaster switch so that it uses the sound card input.
> -----Original Message-----
> From: Pete Smith [mailto:n4zr@contesting.com]
> Sent: Thursday, December 07, 2000 15:43
> To: Gilbert Baron
> Subject: RE: [TRLog] SBDVP
>
>
> At 03:13 PM 12/7/00 -0600, you wrote:
> >I cannot do that because I need the Parallel port for CW keying.
> That means
> >I am forced to use a serial port. It does not seem to work but I have not
> >had a chance to actually measure the lien to see if it is toggling.
> >Thanks for the information.
>
> Actually, you can do both CW keying and PTT on a single LPT port,
> so far as
> TR is concerned, or on a single serial port. I found the SBDVP docs and
> confirmed they say it should work on either kind of port.
>
>
> 73, Pete N4ZR
>
> Contesting is ... Extreme Radio
>
> The World Contest Station Database
> is back up and running at
> http://www.qsl.net/n4zr
>
>
--
FAQ on WWW: http://www.contesting.com/FAQ/trlog
Submissions: trlog@contesting.com
Administrative requests: trlog-REQUEST@contesting.com
Problems: owner-trlog@contesting.com
Feature Wishlist: http://web.jzap.com/n6tr/trwish.html
|