Typo below, that should say Windows based program communicates fine with the
radio on COM3
At 09:38 PM 10/19/00 -0400, NR1DX wrote:
>
>A few weeks ago I put out a query for help with the byte runner serial card.
>and getting it to run with TRLOG, A few suggestions but still no joy in
>mudville.
>
>I have the COM1 and COM2 ports set up on the mother board with their standard
>addresses and IRQ's. I have taken all other plug in cards out of the machine
>but the Byterunner serial card.
>The Byterunner by default now comes up at address A020 for COM3 (not the
>standard 3E8). <TR PORTS> however still does not see COM3. Byterunner WEB site
>provided a program called VSEMUIO.COM which is a DOS TSR which allows me to
>assign a standard Address and IRQ to the card. I run the TSR setting the
>address to 3E8 and IRQ4 . Now <TR PORTS> says that the port is there at 3E8,
>but TRlog still dosent see (i.e. no communication with the radio) the card
>when I run <TR>.
>
>My windows based logging program communicates fine with the radio on COM4, so
>I know the radio and the port are working.
>
>Helpppppp !
>
>Dave
>NR1DX
>dit dit
>
>--
>FAQ on WWW: http://www.contesting.com/FAQ/trlog
>Submissions: trlog@contesting.com
>Administrative requests: trlog-REQUEST@contesting.com
>Problems: owner-trlog@contesting.com
>Feature Wishlist: http://web.jzap.com/n6tr/trwish.html
>
--
FAQ on WWW: http://www.contesting.com/FAQ/trlog
Submissions: trlog@contesting.com
Administrative requests: trlog-REQUEST@contesting.com
Problems: owner-trlog@contesting.com
Feature Wishlist: http://web.jzap.com/n6tr/trwish.html
|