> I use a W1WEF interface that supports paddle input, keyer out and PTT. I
> have already been advised by George that I can return the interface to
> W1WEF for an exchange, but I think the problem I am having may not be
> caused by the interface.
>
> When I key my TS850 in the MANual mode output power is about 50% lower
> than if I switch to VOX.. In VOX output is 100%.
>
> I am using the default PTT delay, etc.
>
> This occurs in a DOS window under Win 98 or when I boot up directly to
> DOS.
> Any ideas why this occurs?
I think I remember a problem like this. If the PTT line to the
radio isn't brought all the way to ground - the radio isn't fully
in transmit.
I believe I had this problem when using pin 1 to connect to the emitter
of the PTT transistor and fixed it by moving the emitter to ground.
Tree
--
FAQ on WWW: http://www.contesting.com/FAQ/trlog
Submissions: trlog@contesting.com
Administrative requests: trlog-REQUEST@contesting.com
Problems: owner-trlog@contesting.com
Feature Wishlist: http://web.jzap.com/n6tr/trwish.html
|