TRLog
[Top] [All Lists]

[TRLog] Dx Telnet

Subject: [TRLog] Dx Telnet
From: smlondon@lucent.com (Steven London)
Date: Wed, 8 Mar 2000 09:50:00 -0700
Bob,

I used a separate computer running only Wintelnetx on it.  This computer was
only used as a router to convert internet spots into "packet" spots that
were output on a COM port.  The COM port output from this computer was
connected to a COM port on another computer which was running only TR.

An interesting experiment would be to run Wintelnetx and TR on the same
computer.  I think it would require 2 COM ports that were looped around
between Wintelnetx output and TR packet input.

Steve, N2IC


-----Original Message-----
From: Soro Roberto <roberto.soro@sia.it>
To: 'Steven London' <smlondon@lucent.com>
Date: Wednesday, March 08, 2000 9:52 AM
Subject: RE: [TRLog] Dx Telnet


>Hi Steve,
>did you use it to receive spot with TR  internally or via a com-port?
>I mean, do I need an extra com port for receiving spot from TR??
>Could you help me a little understanding?
>Thanks a lot.
>Bob,I2WIJ - J49WI
>
>mailto:i2wij@qsl.net
>http://www.qsl.net/i2wij/
>
>
>-----Original Message-----
>From: Steven London [mailto:smlondon@lucent.com]
>Sent: Wednesday, March 08, 2000 12:02 AM
>To: ve5mx@sk.sympatico.ca; Bud Hovey; TR Reflector
>Subject: Re: [TRLog] Dx Telnet
>
>
>
>I used the K1TTT Wintelnetx software this past weekend to receive (not
send)
>spots with TR 6.48.  Once I configured TR to automatically insert LF and CR
>on the packet interface it worked fine.
>
>Wintelnetx is also free, unlike DXTelnet.
>
>73,
>Steve, N2IC
>
>
>-----Original Message-----
>From: Todd Bendtsen <ve5mx@sk.sympatico.ca>
>To: Bud Hovey <wf2b@arrl.net>; TR Reflector <trlog@contesting.com>
>Date: Tuesday, March 07, 2000 4:01 PM
>Subject: Re: [TRLog] Dx Telnet
>
>
>>
>>Hi Bud,
>>
>>I've been able to use it successfully with TR. I've been using it in the
>>single port mode where all you can do is receive spots, you cant send
>>spots to the cluster. There is a 2 port mode that lets you send and
>>receive data but I have not tried that. The documentation for DXTelnet
>>has all the particulars you need. It is quite simple to implement.
>>
>>73 Todd
>>VE5MX
>>
>>--
>>FAQ on WWW:               http://www.contesting.com/trlogfaq.html
>>Submissions:              trlog@contesting.com
>>Administrative requests:  trlog-REQUEST@contesting.com
>>Problems:                 owner-trlog@contesting.com
>>Feature Wishlist:   http://web.jzap.com/n6tr/trwish.html
>>
>
>
>--
>FAQ on WWW:               http://www.contesting.com/trlogfaq.html
>Submissions:              trlog@contesting.com
>Administrative requests:  trlog-REQUEST@contesting.com
>Problems:                 owner-trlog@contesting.com
>Feature Wishlist:   http://web.jzap.com/n6tr/trwish.html


--
FAQ on WWW:               http://www.contesting.com/trlogfaq.html
Submissions:              trlog@contesting.com
Administrative requests:  trlog-REQUEST@contesting.com
Problems:                 owner-trlog@contesting.com
Feature Wishlist:         http://web.jzap.com/n6tr/trwish.html


<Prev in Thread] Current Thread [Next in Thread>