I'm still running 6.47 -- so, I'm behind a bit...
<<<Runtime error 204:>>>
A couple of times, during ARRL DX CW, I got a run time error 204 at 1F4F :
36C8.
I was able to replicate the error today.
If I type in a dupe call, hit <enter>, then spacebar (don't ask me why I did
that!), I get the runtime error.
If I key in anything at the dos prompt that appeared with the error message and
press <enter>, the PC goes through a complete reboot.
If I just hit <enter> or spacebar after the dupe call entry, I get the
requisite beep, the 'dupe' following the callsign and clearing of the callsign
field.
<<<Flashing BandMap Display>>>
I'm operating in two radio mode with two Omni VI's.
I'm looking at the radio 1 bandmap.
If I move Radio 2 to 15m (radio1 being on any other band), the bandmap display
begins flashing and data entry into the callsign field is sporadic. If I switch
to Radio2 (alt-R), the display continues flashing on the 15m bandmap and data
entry is sporadic at the callsign field.
If I move radio 2 to any other band not occupied by radio 1, the bandmap and
callsign field data entry are returned to normal.
If I move radio 2 to any other band and move radio 1 to 15m, the bandmap and
callsign field data entry are normal.
Any ideas?
73,
Dale Martin, KG5U
kg5u@hal-pc.org
http://www.hal-pc.org/~kg5u
--
FAQ on WWW: http://www.contesting.com/trlogfaq.html
Submissions: trlog@contesting.com
Administrative requests: trlog-REQUEST@contesting.com
Problems: owner-trlog@contesting.com
Feature Wishlist: http://web.jzap.com/n6tr/trwish.html
|