Ron Chambers writes:
>
>*If I issue a freq change command in TR (using alt-N or by entering the
>freq preceded by a minus sign), the 765 will change freq but it will be
>placed in SPLIT mode everytime.......(and if I am in CW it will only go to
>NARROW)......selecting a station/freq from a packet spot works
>fine......every once in a while (10% of the time) the command from the PC
>to the 765 gets ignored or it goes to the freq for a split second and then
>returns to the previous freq....
The Alt-N and '-' commands are for setting the transmit frequency
for split operation. This is why you are put into split mode.
If you just want to move the radio to a frequency simply type the
frequency into the call window and hit the enter key.
14203
or
14203.59
or if you are already on 20m
203
--
George Fremin III "I'm talkin' 'bout that outlaw X
Austin, Texas It's cuttin' through the air.... "
K5TR (ex.WB5VZL)
512/416-7010 -- "Heard it on the X"
geoiii@kkn.net -- ZZ Top
http://www.kkn.net/~k5tr
--
FAQ on WWW: http://www.contesting.com/trlogfaq.html
Submissions: trlog@contesting.com
Administrative requests: trlog-REQUEST@contesting.com
Problems: owner-trlog@contesting.com
Feature Wishlist: http://web.jzap.com/n6tr/trwish.html
|