Being relatively new to contesting programs (as well as far from being a
DOS wizard) , I have had some problems getting TR Log 6.22 & my TNC (which
is a KAM+, firmware v 8.2) to 'play nice' together. I am hoping someone on
the reflector may have a solution and/or some advice & tell me what I'm
doing wrong.
I am unable to get anything intelligible from the TNC when in the TR Log
Packet window. When I first started with this, I could not communicate at
all with the TNC; when I turned on the KAM +, I got a string of characters
that looked like cartoons, & I could not type anything that the KAM would
acknowledge. I found that the KAM default was set to 9600 baud, so I made
my changes in the LOGCFG.DAT file accordingly. This time I was actually
able to talk to the TNC & connect to the packet cluster; I recieved back
alphanumeric characters, but they were either partial words, jumbled,
squished together, or otherwise unintelligible-the TNC understands what I
am trying to tell it, but TR is seemingly able to decipher what is coming
back from the TNC.
Here's what I have tried, in addition to the aforementioned:
1. Baud rate changes for both the TNC & TR log--nothing works. I tried at
1200, 2400 & 4800, same results.
2. EIGHT BIT PACKET PORT = TRUE This does not seem to change anything.
I have no such problems with NA 10.26, TNC & program are fine at 9600 baud
& below.
I use this TNC primarily for Log Windows (Timewave Technologies) &
ocasionally with DX4WIN 1.12, have never had a problem. I pulled down the
TNC settings from Log Windows 3.05 , & saw it was set at 8 bits, 1 stop
bit, & no parity. It is my understanding that the defaults for TR are 2400
baud, 7 bits, 1 stop bit, & even parity; the EIGHT BIT command sets the
bit & parity commands right, but uses 2 stop bits. Is this my problem, & is
there a way to fix this without screwing everything up for Log
Windows/DX4WIN?
Any assistance will be greatly appreciated--from what little I've done with
TR Log, it seems like a neat program ( I knew I made the right choice when
I saw it supported CQ-M right 'out of the box' :-)), & I would like to use
it as the contesting program of choice.
TNX in advance & 73 de K0XQ
Sean
-0400 (GMT-0400)
Received: from aosun.naic.edu (golf) by nevis.naic.edu (4.1/SMI-4.1)
id AA25379; Mon, 27 Apr 98 09:27:34-040
Date: Mon, 27 Apr 98 09:27:34-040
Message-Id: <9804271327.AA25379@nevis.naic.edu>
From: "Angel M. Vazquez - PC NetW Admn" <angel@naic.edu>
To: pr-ham@mail.isla.net
Subject: Re: [pr-ham] Hola
X-Mailer: Pronto E-Mail [version 2.01]
Mime-Version: 1.0
Content-Type: text/plain
Content-Transfer-Encoding: 7bit
Precendence: bulk
Sender: pr-ham-owner@mail.isla.net
Reply-To: pr-ham@mail.isla.net
Status: RO
"Bienvenido a la Isla" Tree,
We here at KP4AO (The Arecibo Observatory ARC) also share salutations
and invite you to visit the facilities and be our guest as well.
Have a great time at dinner (try the mofongo..HI.HI). "BUEN PROVECHO" a
todos.
Angel - WP3R
_______________________________________
Angel M. Vazquez angel@naic.edu
Arecibo Observatory (787)878-2612
P.O. Box 995 fax (787)878-1861
Arecibo, PR 00614 A.R. CALL WP3R
National Astronomy and Ionoshpere Center
--
Puerto Rico Hamradio Mailing List http://ham.isla.net/list.asp
for help: ham@isla.net
--
FAQ on WWW: http://www.contesting.com/trlogfaq.html
Submissions: trlog@contesting.com
Administrative requests: trlog-REQUEST@contesting.com
Problems: owner-trlog@contesting.com
Feature Wishlist: http://web.jzap.com/n6tr/trwish.html
|