Craig R. Cook writes:
>
>I am having a little prob with the FT-920. All the rig interface features
>seem to work, except for the shift keys. They do not qsy the radio in s&p
>mode, they do not work the rit in cq mode. I tried several different
>contests, and made sure shift enable was set to on. It seems that it would
>be possible, the rit is not a pot or anything.
>Tree?
The problem (unless they fixed it in the 920) is that Yaesu does
not have commands to do this easily. In the kenwood
command set there are VFO and RIT "bump" commands.
They change the VFO/RIT frequency much like it does
when you push the up/down buttons on the microphone.
Yaesu does not have such a command - you can send the
VFO or RIT to a frequency but the commands to do this
are very long and it would take way too much time
to send the command and have the radio move - in other
words you would all be complaining about how sluggish
the VFO and RIT controls are with TR.
--
George Fremin III "You give me a $10,000 custom guitar
Austin, Texas and Chet Atkins a $200 discount
K5TR (ex.WB5VZL) store special, and who do you think
512/416-7010 will make better music?"
geoiii@bga.com -- Lee AA4GA
http://www.kkn.net/~k5tr
--
FAQ on WWW: http://www.contesting.com/trlogfaq.html
Submissions: trlog@contesting.com
Administrative requests: trlog-REQUEST@contesting.com
Problems: owner-trlog@contesting.com
Feature Wishlist: http://web.jzap.com/n6tr/trwish.html
|