>EXACTLY how do you activate RIT. If I use the right and left shift keys
>they do qsy the rig up and down but no RIT is activated. If I manually
>turn on RIT the shift keys change frequency but pressing both does not
>clear RIT. Incidendtly it is VERY hard to control. There is a LOT of
>hysterisis. After you let go of the key the frequency keeps changing for
>a short time (too long IMHO) and it is hard to make very small changes,
>even with a tap.
Turn the RIT ON on the front of the radio.
In the CQ mode the shift keys tune and clear the RIT.
In the Search and Pounce mode the shift keys tune the main vfo.
--
George Fremin III
Austin, Texas C.K.U. "It is hard to be in one place at the same time."
K5TR -- Overheard at the TR-Log booth
512/416-7010 at the Dayton Hamvention
geoiii@bga.com
--
FAQ on WWW: http://www.contesting.com/trlogfaq.html
Submissions: trlog@contesting.com
Administrative requests: trlog-REQUEST@contesting.com
Problems: owner-trlog@contesting.com
Feature Wishlist: http://web.jzap.com/n6tr/trwish.html
|