>As long as you are going to operate on the bandmap, how about one more:
>
>Often when S&Ping the primary purpose is finding multipliers. The addition
>of the contents of the exchange window, or at least the multiplier, to the
>bandmap would be extremely useful since it is not always obvious from the
>callsign. It would also be useful when an op is encountered who doesn't
>give his callsign with each QSO (shudder) since the exchange IS given in
>each QSO. This seems to happen most frequently in pileups that I can't
>readily break (there are a lot of those) and want to be sure to come back
>to later.
TR already does this - when you tune the rig to the freq in the
band map TR-Log shows you the exchange that you copied for
the station in the bandmap. This feature has been around
since the first bandmap in TR-Log.
--
George Fremin III
Austin, Texas C.K.U. "It is hard to be in one place at the same time."
K5TR -- Overheard at the TR-Log booth
512/416-7010 at the Dayton Hamvention
geoiii@bga.com
--
FAQ on WWW: http://www.contesting.com/trlogfaq.html
Submissions: trlog@contesting.com
Administrative requests: trlog-REQUEST@contesting.com
Problems: owner-trlog@contesting.com
|