>Does anyone know how I can check the w9xt card to see if trlog
>actually sees it before I build the cable?
You can enable the DVK stuff in TR to talk to the XT card
and play a message - you should hear the relay click in
the XT card when it goes into transmit.
If you are seeing two lpt ports in the bios - then it
sounds like the computer is finding the port.
You can also use the TR program to check what
ports the machine has.
Type: TR PORT
at a command prompt.
Page 55 of the manual has the test/special modes.
--
George Fremin III
Austin, Texas C.K.U. "I'm on a mexican radio"
K5TR - Wall of Voodoo
512/416-7010
geoiii@bga.com
--
FAQ on WWW: http://www.contesting.com/trlogfaq.html
Submissions: trlog@contesting.com
Administrative requests: trlog-REQUEST@contesting.com
Problems: owner-trlog@contesting.com
|