SECC
[Top] [All Lists]

[SECC] Variable capacitor anti-arc information needed

Subject: [SECC] Variable capacitor anti-arc information needed
From: jeflanders at comcast.net (Jerry Flanders)
Date: Thu, 25 Oct 2012 17:33:19 -0400
Should be minimal -- you only cover the small section that was arcing.

I wonder if there is a way to secure teflon 
pipe-sealing tape to a flat surface. That would 
do the trick if you could glue it down, but 
teflon is notorious for NOT sticking to anything, including glue.

Jerry W4UK

At 04:10 PM 10/25/2012, you wrote:
>Wondering how much the different technique will 
>change the capacitance range...
>
>
>Sent from my Samsung Epic? 44G
>
>
>Jerry Flanders <jeflanders at comcast.net> wrote:
>
>
>I saw that too. Maybe it was QST. I think they wrapped tape over the
>arcing area. They explained that once it arcs, it is prone to keep
>doing it unless you protect the area with some dielectric.
>
>Maybe they used a Kapton tape. If I had that problem, I might just
>try ordinary black plastic electrical tape to see if it cured it.
>
>GL
>
>Jerry W4UK
>
>At 02:00 PM 10/25/2012, John Getz wrote:
> >A month or two ago I remember reading an article about some sleeves
> >that can be placed on the plates of a variable capacitor to prevent
> >arcing.  I now have a need for such an item and can't find the
> >article.  Does anyone have that information?
> >
> >Thanks,
> >
> >--
> >John Getz, AD8J
> >24 Stony Ridge
> >Asheville, NC  28804
> >828-424-7145
> >
> >_______________________________________________
> >SECC mailing list
> >SECC at contesting.com
> >http://lists.contesting.com/mailman/listinfo/secc
>
>_______________________________________________
>SECC mailing list
>SECC at contesting.com
>http://lists.contesting.com/mailman/listinfo/secc


<Prev in Thread] Current Thread [Next in Thread>