I have the same problem on my FT-847
Gordon N4LR
--- On Tue, 1/17/12, Michael Condon <mrcne4s at yahoo.com> wrote:
From: Michael Condon <mrcne4s at yahoo.com>
Subject: Re: [SECC] Dead CAT
To: "gregpotter at charter.net" <gregpotter at charter.net>, "secc:
contesting.com" <secc at contesting.com>
Date: Tuesday, January 17, 2012, 9:58 AM
Greg,
I have had that happen twice....?? on a 1000mp.
Last time, I replaced the IC with a Max232 device... but the foil vias?around
that area are getting pretty ratty.
A long time ago, I read somewhere that this was a problem with this series
Yaesu.
?
The rig has been OK after the last fix.?
Good luck...
Mike
?
?
Please use ne4s at iham.us as my address.
From: "gregpotter at charter.net" <gregpotter at charter.net>
To: secc: contesting.com <secc at contesting.com>
Sent: Tuesday, January 17, 2012 7:40 AM
Subject: [SECC] Dead CAT
I have discovered the root cause of my Rig/PC issues in the NAQP.? It appears
my RS232 CAT connection on the Mark V blew out.? UGH!? Perhaps some RF in the
shack.? I don't even own an amplifier and I was running 100W, but that seems to
be the only conclusion I can come to as the root cause (unless the rig is just
getting old like the rest of us.? :)? )
The good news is the radio still works great.?
73 de Greg NM2L
_______________________________________________
SECC mailing list
SECC at contesting.com
http://lists.contesting.com/mailman/listinfo/secc
-----Inline Attachment Follows-----
_______________________________________________
SECC mailing list
SECC at contesting.com
http://lists.contesting.com/mailman/listinfo/secc
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.contesting.com/pipermail/secc/attachments/20120117/efd6a36d/attachment.html
|