SECC
[Top] [All Lists]

[SECC] N1MM Logger for the GA QSO PARTY - Question

Subject: [SECC] N1MM Logger for the GA QSO PARTY - Question
From: W4NZ at comcast.net (Ted Bryant)
Date: Wed, 8 Apr 2009 13:45:40 -0400
Jere,

N1MM works great for Georgia stations in the GQP.  We used it in the GQP last 
year as W4NZ/m.  If you are not very familiar with the software, I highly 
recommend reading the Quick Start Guide on the N1MM website www.n1mm.com .  It 
is the first menu pick under "Help".  Also, refer to Paragraph 49.5 QSO 
Parties, in the N1MM manual.

When you set up N1MM for the GQP, it loads both the county identifier file, 
since QSO's are valid with other GA stations, and the state multiplier file.  
You do not need to import anything.  It does accept DC as a mult.

73, Ted W4NZ

  -----Original Message-----
  From: secc-bounces at contesting.com [mailto:secc-bounces at 
contesting.com]On Behalf Of Kt4zb at aol.com
  Sent: Wednesday, April 08, 2009 12:55 PM
  To: SECC at contesting.com
  Subject: [SECC] N1MM Logger for the GA QSO PARTY - Question


  Hi all - Quick question.  Will N1MM work for stations in Georgia?  I looked 
at the mult file and it was the county list.  I tried to import the 
state/province list, but wouldn't work.  So I know it will work for outside GA 
but inside GA?????  Think I may have used GENLOG in the past.  Will look at the 
one from W4GKF.  Do any of these have DC as a separate mult or do I need to 
edit?

  There will be several on from around Savannah this weekend (probably all on 
SSB).

  Best to all and good hunting - Jere, KT4ZB

-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
http://lists.contesting.com/mailman/private/secc/attachments/20090408/a30f323d/attachment.html
 

<Prev in Thread] Current Thread [Next in Thread>