SECC
[Top] [All Lists]

[SECC] 160M Ant Question

Subject: [SECC] 160M Ant Question
From: w4dd at arrl.net (Jeff W4DD)
Date: Sun, 27 Jan 2008 13:51:40 -0500
I've had great luck using a 160M quarter wave vertical shot up over some
tall trees.  It's a pain putting it up each fall.  I don't leave it up all
year because the moving branch tend to destroy it over the summer.

 

So I've been considering two other approaches to get (stay) on 160M;

 

1) Inverted Vee off the tower at 50ft (simple)

 

2) Shunt feed the tower (more complex)

Tower is 70Ft with A-4 tribander at the top, and 80 and 40M Inv Vees.

All antennas terminate in an RCS-8V antenna switch mounted on the bottom of
the tower along with rotor control lines.

Tower currently has 4 in-ground radials (20-60 ft) with 10 ground rods every
16 ft on the radials

 

Any advice as to which approach is best and the performance of only using a
70ft tower?

 

Thanks,

Jeff, W4DD

-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
http://lists.contesting.com/pipermail/secc/attachments/20080127/1121d33a/attachment.htm
 

<Prev in Thread] Current Thread [Next in Thread>