>From an earlier response:
"The new Winkey 2 (USB) does work with N3FJP's software but the speed pot is
does not function when it is under software control so you will still have to
use the
up/down arrow keys... It has this same behavior with other software including
N1MM and WriteLog."
When WK-2 is being controlled by the computer, it sends "status bytes" to the
computer each time the speed pot setting is changed. The status bytes indicate
the rotational position of the pot. It is up to the software developer to
decide whether his program processes this info and adjusts the speed. The
Winkeyer software manual cautions against allowing both the program and the
speed pot to set the speed, which is probably why most programmers don't do it.
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.contesting.com/pipermail/secc/attachments/20071215/1d2c7b55/attachment.htm
|