>
>The slingshot and some copper weld wire will fix the main item.
>Any references to current reading or construction of limited size low band
>RX antennae would be appreciated.
Let me hasten to say that I have no pecuniary interest in this, but you
might want to take a look at the website of AY Technologies. I hear it's
run by a person who is fairly reputable . . .
http://www.aytechnologies.com/Products/products.htm
In addition, you may want to read the initial article on the K9AY loop that
was in the September '97 QST. It's on the ARRL web site.
I use two K9AY loops and find them to be very helpful.
GL,
Jay, K4OGG
--
SECC on the Web: http://secc.contesting.com/
Submissions: secc@contesting.com
Administrative requests: secc-REQUEST@contesting.com
Problems: owner-secc@contesting.com
|