Hi Paul
Thank you for your input.
I now have pre-recorded WAV files up and running.
73
Nick OZ3TQ
Fra: "Paul O'Kane" <pokane@ei5di.com>
Til: "sd-user" <sd-user@contesting.com>
Sendt: tirsdag, 13. oktober 2020 20:06:17
Emne: Re: [SD-User] SD DVR from SD\Fx.wav
On 13/10/2020 15:17, Nick via SD-User wrote:
How do I set up F1.wav - F8.wav files in the SD folder on my PC to get through
to the radio, using the DVR command?
My Kenwood TS-480 has no internal DVR and I am using a SignaLink USB interface.
SD, via its DVR command, enables playback of your pre-recorded WAV files
- no more and no less. With no external connections or device, you'll
hear playback through your computer's speaker(s).
To use the SignaLink, the audio has to be directed, using Windows "Sound
and Audio Devices Properties", to the SignaLink unit - as described in
"Default Sound Card Selection" in the SignaLink manual.
Once that is done, correct operation is a matter of the
interface/connections between the SignaLink unit and the rig - SD is out
of the loop.
Hope that helps.
73,
Paul EI5DI
_______________________________________________
SD-User mailing list
SD-User@contesting.com
http://lists.contesting.com/mailman/listinfo/sd-user
_______________________________________________
SD-User mailing list
SD-User@contesting.com
http://lists.contesting.com/mailman/listinfo/sd-user
|