I have just tried launching SD 15.56 and do not have the problem using a
real RS232 cable between the K3 and the PC.
Email me if you want to compare set-up details. I can try a USB to
RS232 converter too if necessary.
Regards,
Mike VP8NO
On 04/01/2012 07:06, earlval38 wrote:
> Good Morning all
> I only use SD about four or five times per year, not being a true aand avid
> contester; however I have just down loaded the latest version and received my
> key from Paul only to find a problem.
>
> With the 'ports' and 'bps' etc all set up as per my 2009 SD version, the K3
> is keyed but with out any output as soon as I finish setting SD up. No amount
> of changing the various settings seems to alter any thing, the K3 is keyed.
> Please note I do not use any other type of interface and only use SD for the
> Logging aspect. The K3 being keyed as always via my own key and keyer.
>
> The situation is: Laptop 'com 5' through a USB interface direct to the K3.
> All other programs work ok via this routing. Decided to uninstall the latest
> SD and reinstall my old 2009 version...now every thing is fine with full
> operation as I have had in the past.
> So Help...just what do I need to change in the latest version to get it to
> run as a simple contest logger????
> Regards to all
> Vince
> G4DQP
> _______________________________________________
> SD-User mailing list
> SD-User@contesting.com
> http://lists.contesting.com/mailman/listinfo/sd-user
>
_______________________________________________
SD-User mailing list
SD-User@contesting.com
http://lists.contesting.com/mailman/listinfo/sd-user
|