----- Original Message -----
From: "Ian Greenshields" <ian.greenshields@gmail.com>
> ... it would be useful to be able log the contact without
> sending the pre-programmed exchange and without having to
> disable ESM & then re-enable it.
F12 will do it - it may be an undocumented feature :-) I
haven't checked the manual.
> This led me to wonder whether it would be possible, when
> tuning the rig, for SD to pull a callsign down into the call
> entry field if it was already in the log or in the quick
> memory (i.e. saved for later or ignored).
Thanks, I'm working on it. If you download SD.EXE V14.26b
from www.ei5di.com/sdexe.zip, you see that the Quick Memory
window has changed and is starting to look like a Band Map -
although it is early days yet.
I expect to be able to pull down a callsign, but only if
the callsign field is blank - otherwise rig control is
temporarily disabled at present.
> A quick F11, - , or tune of the dial clears it if not
> needed. At a more esoteric level, the 'spots' could
> time out after 30 minutes or so to keep the map fresh.
>From my (selfish) point of view, the best option for
clearing a call is Esc. A "tune of the dial" may not
be possible initially - since rig control is disabled
when the callsign field is not blank.
73,
Paul EI5DI
_______________________________________________
SD-User mailing list
SD-User@contesting.com
http://lists.contesting.com/mailman/listinfo/sd-user
|