sd-user-request@contesting.com schrieb:
> Send SD-User mailing list submissions to
> sd-user@contesting.com
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://lists.contesting.com/mailman/listinfo/sd-user
> or, via email, send a message with subject or body 'help' to
> sd-user-request@contesting.com
>
> You can reach the person managing the list at
> sd-user-owner@contesting.com
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of SD-User digest..."
>
>
> Today's Topics:
>
> 1. Re: Direct frequency entry and CQ repeat with SD (Paul O'Kane)
> 2. Re: Direct frequency entry and CQ repeat with SD (Sverre Holm)
> 3. Using SD with RigExpert Plus (Peter Sargent)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Mon, 18 Sep 2006 17:42:55 +0100
> From: "Paul O'Kane" <pokane@ei5di.com>
> Subject: Re: [SD-User] Direct frequency entry and CQ repeat with SD
> To: <sd-user@contesting.com>
> Message-ID: <002701c6db41$7f5609a0$0201a8c0@paul>
> Content-Type: text/plain; format=flowed; charset="Windows-1252";
> reply-type=original
>
> ----- Original Message -----
> From: "Sverre Holm" <svholm3@broadpark.no>.
>
>> 1. I was not able to get the direct frequency entry to work,
>
> This problem is usually caused by mismatched parameters
> between SD and your rig. Also, until everything is
> working, leave POLLTIME and LINKTIME at the default
> settings.
>
> If necessary, delete SD.INI, then run SD (and the PORTS
> command) again. This will create a new SD.INI file
> with default parameters - apart from any changes due
> to PORTS.
>
>> 2. I could not get the repeat function for CQ to insert
> the specified pause,
>
> There is a bug in the REPEAT function when used with
> WinKey. The timer should not start until the CQ message
> finishes. With WinKey, it starts immediately. Just
> choose whatever value of R1 - R10 that gives a reasonable
> break time.
>
> 73,
> Paul EI5DI
Yes ! And please do not press the CQ-Key more than twice!
(using a 102-key-Keyboard - keylock -> so Number 1 makes CQ -> keying with
winkey/microHAM-cw-keyer on USB-LPT5)
third pressing of CQ-Key will give you a broken CW-text. Character-pointer
error ?
SD should buffer it or not accept (at a "full" Buffer")
But... it is not important... only if Paul has too much time...
73
Fred
dl5ym
_______________________________________________
SD-User mailing list
SD-User@contesting.com
http://lists.contesting.com/mailman/listinfo/sd-user
|