----- Original Message -----
From: "peter jackson" <peter.jackson17@ntlworld.com>
> Hi, I think I have found a small anomaly in the Windows
> version. With a callsign in the field you press F2 to send
> call and serial number, the cursor goes to the serial
> number field, but if you have to press F2 a second
> time (the station hasn't come back) the cursor goes to the
> middle number in the RST, you then have to press Tab.
In these circumstances SD is working as intended, and here's
why.
The F2 message usually finishes with a simulated Enter (#E).
If you are in the serial field, and it is empty, an Enter
will take you to the RST field (specifically to the S in RST).
For the rare occasions that someone sends you something other
than 599 and, even rarer still, you want to actually log it
(not much point any more as it's never checked), Enter will
take you between all fields in the appropriate sequence.
Callsign + Enter - Serial Field
Empty Serial + Enter - RST Field
Edit RST + Enter - Serial Field
Log Serial and Enter - QSO is logged
If this becomes a problem, change the message for one of the
other function keys (say F5 to F8) to be the same as F2, but
without the final #E.
73,
Paul EI5DI
_______________________________________________
SD-User mailing list
SD-User@contesting.com
http://lists.contesting.com/mailman/listinfo/sd-user
|