G'day,
SDI runs in full screen on my Gateway Win98SE lap-top system. Pentium
133. Also on the Win98SE Celeron based HP Brio system at the salt mine.
"Border = 0" then activate the "full screen" button on the SDI tool bar.
On my 700MHz P3 Dell at home in dual boot, Win98SE also OK but when booted
to WinXP all the buttons on the SDI tool bar have vanished so no full
screen under XP. Not tried the ALT+ENTER toggle yet under XP but it works
OK in 98SE.
For what it's worth.
I will be doing a bit of S&P during the contest, probably on 15 and 40M,
10M if it opens at all.
Regards,
Mike VP8NO
----- Original Message -----
From: "Martin Davies G0HDB" <g0hdb@amdavies.demon.co.uk>
To: <sd-user@contesting.com>
Sent: Wednesday, July 21, 2004 11:29 AM
Subject: [SD-User] Re: Running in full-screen mode
> On 20 Jul 2004 at 9:23, sd-user-request@contesting.com wrote:
>
> > Message: 3
> > Date: Mon, 19 Jul 2004 19:52:22 +0100
> > From: "Paul O'Kane" <pokane@ei5di.com>
> > Subject: Re: [SD-User] Running SD/Win progs in full-screen mode
> > To: <sd-user@contesting.com>
> >
> > There's nothing in the code for SD and SDI that will prevent
> > you doing this, but there may be hardware/software issues
> > depending on your PC and its particular version of Windows.
> >
> > Try these steps in sequence.
> >
> > 1. In SD, use the BORDER command to set border to 0.
> > The default is 1, whick looks better in a window.
> > If you don't do this, Win98 is likely to give the
> > "Program must be run in a window" message - later
> > version of Windows will switch to full-screen, but
> > you may lose the end of some lines (with a border of
> > 1, the line length is 82 characters rather than 80).
> >
> > 2. You can then toggle between full-screen and window
> > with Alt-Enter (hold down Alt and press Enter/Return)
>
> > With any luck, you should now have full-screen and SD will
> > look like it used to under DOS. There may be a few
> > differences.
> >
> > 1. The colours may look different - use the COLOUR command
> > until you get a combination that looks OK. The colours,
> > and especially the background colour, will not be
> > exactly the same as you would have seen in DOS.
> >
> > 2. Your machine may seem to run slowly - this is more
> > likely in full-screen mode (with its 25x80 character grid)
> > than in a Window.
> >
> > 3. The cursor may be less visible, or invisible.
> >
> > 4. The program may run quite happily for a while, and then
> > the PC will freeze.
> >
> > You may be lucky, and not notice any of these side-effects.
> > I only mention them because I've seen them all at one time or
> > another.
>
> Hi Paul, thanks for all the suggestions. I've tried various approaches
but I
> still can't get SD and SDI for Windows to behave themselves under
Win98SE
> on my system. I can make them run in full-screen mode by using the
> BORDER command as you suggest but I then suffer various adverse effects
> such as lockups. I've tried new video drivers, to no avail. It looks
like my
> hardware (a PCChips M571 mobo with inbuilt graphics based on the SiS
> 5598 chipset), WIn98SE and your software aren't wholly compatible with
> each other!
>
> > In general, I no longer try to run SD full-screen. I use the
> > Fonts option within Properties (after right-clicking the logo
> > at the top LHS of SD's window) to select the largest font,
> > and the corresponding window, that will fit on my screen.
>
> The monitor (an IBM 8513) on my radio PC only has a 12" screen so I need
> to run full-screen to be able to read the characters without using a
magnifier -
> my eyesight ain't what it used to be :-)))
>
> Is there any fundamental reason why I can't run last year's SDI program
> (V10.03 I think) under DOS, using the latest SDIOTA.CTY and IOTA.REF
> files? Are there any bugs or funnies that are likely to affect my
probably very
> limited, and non-serious, participation in the IOTA contest?
>
> --
> 73, Martin G0HDB
>
> _______________________________________________
> SD-User mailing list
> SD-User@contesting.com
> http://lists.contesting.com/mailman/listinfo/sd-user
_______________________________________________
SD-User mailing list
SD-User@contesting.com
http://lists.contesting.com/mailman/listinfo/sd-user
|