----- Original Message -----
From: "vk2ar" <vk2ar@tlen.pl>
> Had a problem with WAG contest, because program did
> not accept full DOK (max up to 5 or 6 letters/numbers)
> -only first two - >>> 599 AB.
If you want SD to track multipliers in this contest,
your're limited to recording a maximum of 4 characters
for the DOK.
Multipliers are the first character in the DOK - giving
a maximum of 26, representing the letters A - Z.
_________________________________________________
Here's the corresponding setup for SD.
Select Type 4 - General, Area Multipliers.
Multipliers Count : B (by band)
Points CW QSOs : 3
Points SSB QSOs : 3
Pts/Bonus : 0 (multipliers)
Name of .MLT File : WAG
Receive Serials : Y (record DOK in Serial field)
Mode : CW or SSB
Mixed-Mode : Y or N (your choice)
If Yes
Mults count both modes : N
Work same station on
both modes : Y
Work German stations only. Log DOK in Serial field (DL
stations don't give serials). To track multipliers, you
must then enter the first character of the DOK (A-Z) in
the Area Code (AC) field.
___________________________________________________
If you're not worried about tracking multipliers, you
can always use SD Option 11, and record the DOKs in full.
When DARC publishes a Cabrillo layout for WAG I'll
update SDCHECK as necessary.
73,
Paul EI5DI
_______________________________________________
SD-User mailing list
SD-User@contesting.com
http://lists.contesting.com/mailman/listinfo/sd-user
|