RTTY
[Top] [All Lists]

Re: [RTTY] MMVARI and 2Tone (stand-alone?)

To: "'Joe Subich, W4TV'" <lists@subich.com>, <rtty@contesting.com>
Subject: Re: [RTTY] MMVARI and 2Tone (stand-alone?)
From: "Aleksander Otulak" <sp2ewq@wp.pl>
Date: Sat, 11 Nov 2017 09:31:13 +0100
List-post: <mailto:rtty@contesting.com>

Joe,

Thanks for the info. However, I am a bit confused.

In AFSK, 
if one starts 2Tone within N1MM+ MMTTY interface (or WinWarbler, etc.),
which one does the transmitting 2Tone or the MMTTY,
please?

Once, I was told that in such a tandem 2Tone just copy the receiving part,
while MMTTY does both transmitting and an independent (from 2Tone)
receiving.

I will certainly appreciate if You will explain that to me,
please...

Best regards,
Alec/SP2EWQ




-----Original Message-----
From: RTTY [mailto:rtty-bounces@contesting.com] On Behalf Of Joe Subich,
W4TV
Sent: Saturday, November 11, 2017 12:03 AM
To: rtty@contesting.com
Subject: Re: [RTTY] MMVARI and 2Tone (stand-alone?)


2-Tone does not operate stand alone.  It operates only as an RTTY Engine in
DXLab Suite (WinWarbler), N1MM Logger+, WriteLog and certain other logging
software that support the MMTTY XMMT.OCX interface.

73,

    ... Joe, W4TV


On 11/10/2017 5:39 PM, Aleksander Otulak wrote:
> 
> 
> 
> Rick,
> 
> thanks for the info.
> 
> Can You instruct me how to configure 2Tone so that it transmits AFSK 
> as stand alone software, please?
> 
> Best regards,
> Alec
> 
> 
> 
> 
> -----Original Message-----
> From: RTTY [mailto:rtty-bounces@contesting.com] On Behalf Of Rick 
> Ellison
> Sent: Friday, November 10, 2017 8:37 PM
> To: RTTY@contesting.com
> Subject: Re: [RTTY] MMVARI and 2Tone (stand-alone?)
> 
> MMVARI cannot be used as an RX window only. That is used only in the 
> main digital window as an engine for that window.
> 
> 73 Rick N2AMG
> 
> -----Original Message-----
> From: RTTY [mailto:rtty-bounces@contesting.com] On Behalf Of 
> Aleksander Otulak
> Sent: Friday, November 10, 2017 2:08 PM
> To: rtty@contesting.com
> Subject: Re: [RTTY] MMVARI and 2Tone (stand-alone?)
> 
>   
> 
>   
> 
>   
> 
>   
> 
> Hi,
> 
>   
> 
> I want to so configure the combo that
> 
> 2Tone does both Receiving and AFSK Transmitting
> 
> while MMVARI just Receiving only.
> 
>   
> 
> Can anybody suggest how I should do that,
> 
> how to make 2Tone to work as stand-alone,
> 
> please?
> 
>   
> 
>   
> 
> Best regards,
> 
> Alec/SP2EWQ
> 
>   
> 
>   
> 
> _______________________________________________
> RTTY mailing list
> RTTY@contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
> 
> _______________________________________________
> RTTY mailing list
> RTTY@contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
> 
> _______________________________________________
> RTTY mailing list
> RTTY@contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
> 
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty

_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty

<Prev in Thread] Current Thread [Next in Thread>