RTTY
[Top] [All Lists]

Re: [RTTY] Intel NUC, anyone?

To: RTTY contest group <rtty@contesting.com>
Subject: Re: [RTTY] Intel NUC, anyone?
From: Peter Laws <plaws0@gmail.com>
Date: Thu, 26 Oct 2017 14:05:37 -0500
List-post: <mailto:rtty@contesting.com>
On Thu, Oct 26, 2017 at 4:20 AM, David G3YYD <g3yyd@btinternet.com> wrote:
> Using EXTFSK(64) or for that matter 2Tone FSK using bit diddling of a COM
> port control line is one way of making sure you get extra errors on the far
> ends decode and being asked to repeat.

No RS-232 headers, either, in a NUC, which I was secretly hoping for.

I did also look at the jitter info Oba-san has on his site referring
to EXTFSK64.  So USB -> RS-232 -> FSK radio port isn't the best way to
do this (even though it's done all the time).

So my next question is, how to the commercial USB interfaces that
support FSK actually do it?  Are they skipping the RS-232 part and
just wiggling (at 45.45 bauds) some wire that connects to the radio's
FSK port?



-- 
Peter Laws | N5UWY | plaws plaws net | Travel by Train!
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty

<Prev in Thread] Current Thread [Next in Thread>