> is this normal
Entirely normal. The echo you see in MMTTY is generated internally
(Option(O) -> Setup MMTTY(O) -> Misc -> sound loopback -> Int.).
The stored messages in MK II are not generated in MMTTY but stored
in the microKEYER II.
> any way to see what I am typing?
If your transceiver has the ability to generate monitor audio for FSK,
turn it on and see that it is sent to MK II (left channel) so that MMTTY
can decode the audio. Otherwise, there is no provision in MMTTY to
see the external FSK.
A limited alternative is to configure one line of the MK II display to
display "Monitor during transmission". That will show what is sent to
the FSK port but ... only 16 characters.
73,
... Joe, W4TV
On 10/1/2017 2:19 PM, Courtney Judd wrote:
I have a question .... I am using microHam keyer 2 with a PS2 keyboard
plugged in the back. I have DX4WIN open with MMTTY running. I have 8
messages saved and hitting any of these puts the rig into transmit and
sends the message which shows up in the mmtty window. Works great! Now I
can also hit F10 on the PS2 keyboard and it goes into transmit, diddles
and appears to send what ever I type but nothing shows in the mmtty
window.... in other words no visual indication of what I am typing....
is this normal and any way to see what I am typing? Obviously i am a
rookie here! so any help would be appreciated! Thanks, Cort K4WI
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|