I have recently purchased a SignalLink USB and have set it
up in accordance with the supplied instructions for my Kenwood TS-450S but
cannot get it to work satisfactorily. There does not seem to be sufficient
audio. With Digipan there is only a trace of the waterfall and the RX control
on the SignalLink has no effect whatsoever. Only by increasing the transceivers
volume control can I get a meaningful waterfall but the level of noise in the
shack is unacceptable.
This also applies to WSPR, MMTTY and JT65-HF but JT65-HF
won’t trigger PTT.
Can anyone with a SignalLink USB make any suggestions which
might help me to solve this problem.
73 de Bruce G0PCF
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|