Well partial success...downloaded extfsk64 and set that up in MMTTY and
now my TI-8 keys the radio in FSK.
Now to make it diddle and actually send FSK RTTY.
73
On 11/2/2016 02:43, Thom wrote:
I have a Kenwood TS-570D...connected to that radio is a Rigexpert TI-8
Digital interface. The interface is connected to the radio using a
Rigexpert custom cable made for the 570D. ACC2 is being used for FSK
operations
Radio Mode is set to FSK
PTT is on Com5
FSK is on Com6.
Both these ports are Virtual Com Ports
I have set up MMTTY according to the instructions in the TI-8
documentation.
Soundcard set to USB Audio Codec for reception and transmission.
In TX PTT and FSK set to Com 6
In Radio Command Port = Com5 8, 2, none Kenwood group
selected.
in MISC TX port set to Com-TxD(FSK) USB set to Limiting speed. I
have tried all 3 selections in this box.
I cannot get MMTTY to key the radio.
Anyone using this Interface (TI-8) that can give me a hand?
Thanks
--
73
Thom KI8W
"Living deep in the black hole of RF"
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|