In the 7600, there is no FSK keying via the USB CI-V interface that I know
of. I use an external RS-232 port to Icom accessory port interface along the
lines of the W3YY interface (http://w3yy.com/fsk.htm). From there, it's a
matter of configuring MMTTY to toggle the appropriate RS-232 signal to
diddle away.
That said, I understand that the 7300 does have a CI-V command to do FSK
keying. I don't own a 7300, but I've been following the on-line community
very closely. That's why I encouraged Robb to check into the IC-7300 Yahoo
Group as I'm sure someone there has actually used the USB CI-V interface to
do RTTY.
Specifying the COM port in the Icom USB CI-V virtual serial port is a matter
of going into the Windows Device Manager, examining the COM port created by
the Icom USB driver, and changing the COM port number as you desire.
Bob...
> -----Original Message-----
> From: Ed Muns [mailto:ed@w0yk.com]
> Sent: Friday, August 19, 2016 2:02 PM
> To: 'Bob Burns W9BU' <w9bu_lists@rlburns.net>
> Subject: RE: [RTTY] IC7300 band data.
>
> Hi, Bob.
>
> How does the user specify the Com port number in the IC-7600 USB
> interface?
> Is there a separate Com port number for the CI-V CAT control and the
> FSK/PTT keying, say from MMTTY?
>
> Thanks,
> Ed W0YK
> __________________________________________________________
> _____________
>
> -----Original Message-----
> From: RTTY [mailto:rtty-bounces@contesting.com] On Behalf Of Bob Burns
> W9BU
> Sent: 18 August, 2016 04:23
> To: rtty@contesting.com
> Subject: Re: [RTTY] IC7300 band data.
>
> I'm not a WriteLog (WL?) user, so I don't know what band data it's looking
for.
>
> The IC-7300's CI-V over USB interface is an extension of the USB interface
> that my IC-7600 uses. It's been my experience with Ham Radio Deluxe, DX
> Lab Suite, N1MM+ Logger, fldigi, and RMS Express that the CI-V over USB
> interface provides the exact frequency data that those programs are
looking
> for.
>
> By the way, there is a very active Yahoo Group for the IC-7300 which is
> populated with folks who have really picked apart the radio.
>
> https://groups.yahoo.com/neo/groups/ic-7300/info
>
> Bob...
>
> > -----Original Message-----
> > From: RTTY [mailto:rtty-bounces@contesting.com] On Behalf Of Robb
> Webb.
> > Photographer
> > Sent: Wednesday, August 17, 2016 6:12 PM
> > To: rtty@contesting.com
> > Subject: [RTTY] IC7300 band data.
> >
> > Hi everyone, I recently purchased a new IC7300 for my portable rtty
> > contesting.
> > The radio connected to the pc through the USB port and worked
> > perfectly with WL
> >
> > However I cannot get the band data into WL !!
> >
> > What am I missing. Is the data on the usb cable ?
> >
> > Help please
> >
> > Thanks
> >
> > Robb
> > G0URR
> >
> >
> >
> > _______________________________________________
> > RTTY mailing list
> > RTTY@contesting.com
> > http://lists.contesting.com/mailman/listinfo/rtty
>
> _______________________________________________
> RTTY mailing list
> RTTY@contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|