RTTY
[Top] [All Lists]

Re: [RTTY] Gritty vs. 2Tone with N1MM+

To: "'Don Hill AA5AU'" <aa5au@bellsouth.net>, "'RTTY Reflector'" <rtty@contesting.com>
Subject: Re: [RTTY] Gritty vs. 2Tone with N1MM+
From: "Jim McDonald" <jim@n7us.net>
Date: Sun, 10 Jul 2016 16:02:34 -0500
List-post: <rtty@contesting.com">mailto:rtty@contesting.com>
Use this link instead:

https://1drv.ms/f/s!AiNwF15bd4LFgw6-XtgIU6mL-7Ad 

73, Jim N7US


-----Original Message-----
From: Jim McDonald [mailto:jim@n7us.net] 
Sent: July 10, 2016 15:59
To: 'Don Hill AA5AU' <aa5au@bellsouth.net>; 'RTTY Reflector'
<rtty@contesting.com>
Subject: RE: [RTTY] Gritty vs. 2Tone with N1MM+

Hi Don,

I use Gritty with N1MM+ as well as DXLab's WinWarbler.  It's fun to play
with it using a 3 kHz bandwidth, especially with the auto-QSX mode, but I
use it with the same bandwidth as MMTTY and 2Tone (400-450 Hz).

I guess I haven't used it well enough to have a preference between it and
2Tone.  I have MMTTY, two instances of 2Tone, and Gritty sharing the main DI
window.  I have a screenshot of that at
https://1drv.ms/f/s!AiNwF15bd4LFgw55gjyVwT-5aPDi .

73, Jim N7US


-----Original Message-----

I'm curious to know which of you out there running N1MM+ use Gritty?. If so,
if you were running MMTTY in the main DI, and could only run one other
decoder in a 2nd DI, would it be Gritty or 2Tone?

I know running 2Tone is seamless with N1MM+. What about Gritty? I was under
the impression that Gritty worked best with high bandwidth (3 kHz), thus
making it unattractive for FSK users who use narrow filtering. Is this
correct?

Thanks,
Don AA5AU


_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty

<Prev in Thread] Current Thread [Next in Thread>