RTTY
[Top] [All Lists]

Re: [RTTY] RTTY DX'ing tutorial (was: VK0EK RTTY Update)

To: Don Hill AA5AU <aa5au@bellsouth.net>, rtty@contesting.com
Subject: Re: [RTTY] RTTY DX'ing tutorial (was: VK0EK RTTY Update)
From: "Art (K5FNQ)" <k5fnq@lusfiber.net>
Date: Sun, 10 Apr 2016 17:50:11 -0500
List-post: <rtty@contesting.com">mailto:rtty@contesting.com>
OK group (and hopefully I was not the K5### that WW3S wrote about - I never do that other than the few times that NAP3 automatically reset my split as off but that was another dxpedition and I am embarrassed over it) - anyway as to RTTY and split opreation am I not using the software correctly (MMTY) to find the calling station being worked by the DX?

On a DXpedition RTTY split mode, unlike CW where it is possible to listen for and read the frequency of the calling station being worked, RTTY on split does not provide that option to print the station on VFOB, at least not that I can see. No way to print from VFOB to try and find the station being worked. It becomes a crapshoot (using NAP3 and LP PAN to try and see the signal of the RTTY station being worked is impossible with the "call all of the time" crowd.) Is there any way around this?

Hopefully I have overlooked some command or system to read both VFOA and VFOB on my FT5000 on any RTTY program???

Art K5FNQ


On 4/10/2016 15:29, Don Hill AA5AU wrote:
Jamie wrote: " Don AA5AU is an accomplished web author, I havent checked his site, but that would 
be a good place to start with some DO’s and DONT’s of rtty dxing...."

Actually I have thought many times of creating a site dedicated to RTTY DXing. 
I even went so far as to inquire about the site name (rttydxing.com OR 
rttydx.com). Unfortunately I do not have the time to dedicate to it.

Maybe when I retire? That will probably not happen either. HI

73, Don AA5AU

-----Original Message-----
From: RTTY [mailto:rtty-bounces@contesting.com] On Behalf Of WW3S
Sent: Sunday, April 10, 2016 1:33 PM
To: rtty@contesting.com
Subject: Re: [RTTY] RTTY DX'ing tutorial (was: VK0EK RTTY Update)

First off Alex, thank for your contribution to ham software, I use (and registered) several of your 
products.....timing in the pileup is critical, as is tuning off the last station worked...how much depends on the 
situation, no real set amount.....true tailgating, if done correctly, is a good technique, but I feel has 
contributed to all the out of turn calling lately.....and thats not tailgating......when a station clearly comes 
back to SP1ABC, then K5ABC should not be calling, thats just good manners, and probably something their mothers 
should have taught them.....sounds like you have your macros set, which is another plus......nothing breaks the 
rhytym of VE3XYZ 599 TU like “Hi my name is Peter and I’m in EN91 runninga TS440 to a Butternut 
vertical “...... Don AA5AU is an accomplished web author, I havent checked his site, but that would be a 
good place to start with some DO’s and DONT’s of rtty dxing.....

On 4/10/2016 2:19:01 PM, Alex, VE3NEA (alshovk@dxatlas.com) wrote:
I started chasing DX using RTTY three months ago, after 35 years of
DX'ing CW only. Trying to learn the new mode, I searched the
Internet for RTTY tutorials, and I found quite a few, but all of them
either explained how to set up MMTTY, the software that I do not use,
or how to operate in the contests. The only presentation on RTTY
DX'ing I could find just told me that I needed two macros, my callsign
and "599 TU" - something that I had already figured out myself. How to
crack the pileups, how to find the DX listening frequency, how to
choose the right time to send your call - none of this was covered in the 
publications that I could find. I know that many of the subscribers to this 
list are experienced RTTY DX'ers, even though it is a contesting list, some are 
even on the Honor Roll - perhaps you guys could share your RTTY DX'ing 
techniques with those of us who are just making their first steps in this area.

Having no RTTY-specific skills, I tried to use my CW techniques to
crack the RTTY pileups, and this worked, to some extent, but I quickly
discovered that there are some important differences between the two
modes that needed to be addressed. For examnple, in CW I use QSK to
know when the DX
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty

_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty

--
K5FNQ - Art Mouton k5fnq(at)lusfiber.net (or (at)arrl.net) ARRL, QCWA, CW OPS, Louisiana Contest Club, DXCC Honor Roll (Mixed & CW), Digital/RTTY DXCC, 5BDXCC, DXCC 10, 12, 15, 17, 20, 30, 40, 80 Meters


_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
<Prev in Thread] Current Thread [Next in Thread>