I’ve never found 2Tone to be “hands down better overall”......at times it is
better, but I dont see any significant improvement over MMTTY running the FIR
profile....I’ve seen several time when 2Tone had clear decode and MMTTY did
not, and vice versa.....bottom line is you cant have too many decoders....
> On 3/20/2016 9:51:27 PM, Don Hill AA5AU (aa5au@bellsouth.net) wrote:
> > Steve wrote:
>
> "What is the advantage of running 2Tone as a second decoder?"
>
> When you run more than one decoder, you gain diversity. When you run 2Tone
> is a second RTTY window, MMTTY is still decoding in the other. Both decode
> the same signal at the same time. There will be times when both decode fine.
> There will be times when MMTTY will decode something that 2Tone misses and
> times when 2Tone decodes something that MMTTY doesn't.
>
> MMTTY has been a good decoder for many years (since 2000 I think), but 2Tone
> is hands down better overall. I currently run MMTTY in one RTTY window and
> 2Tone in two additional receive-only windows.
>
> 73, Don AA5AU
>
> -----Original Message-----
> From: RTTY [mailto:rtty-bounces@contesting.com] On Behalf Of Steve Carpenter
> via RTTY
> Sent: Sunday, March 20, 2016 8:37 PM
> To: rtty@contesting.com
> Subject: Re: [RTTY] 2Tone Ssetup Help
>
> On 3/19/2016 15:27, Dave Hachadorian wrote:
> > Well another DI Window is supposed to open, along with the 2Tone
> > engine. Maybe the 2Tone engine is hidden behind something else? Look
> > on the left side of the bottom taskbar - do you see an icon with 2T
> > printed on it? If so, it is running, and you just have to move stuff
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|