The update works as advertised. Many thanks to Andy for excellent
software.
73, Chuck, N8CL
On Sat, Oct 3, 2015 at 7:16 PM, aflowers@frontiernet.net <
aflowers@frontiernet.net> wrote:
>
> I've updated TinyFSK to be compatible to both USOS and non-USOS
> demodulators. This results in a few extra shifts being sent in most
> messages (typically 2 or 3 in an alphanumeric exchange like CQWW for US/VE
> stations), but it should print identically even if you mess up your USOS
> configuration in the receiver as long as you don't get any bit errors.
> You can read the details in the release notes, and for the real detail,
> the source code comments around the configuration:
> http://www.frontiernet.net/~aflowers/tinyfsk/
>
> You shouldn't have to do anything other load the new firmware into the
> device as the extra shift characters are handled under the hood when
> needed. Note also that the new firmware will tell you a version number on
> the configuration display so you can know what you have loaded.
> Please let me know if you have any issues. I'm not an avid MMTTY user let
> alone expert, so I don't know all the possible settings that can be
> tinkered with to mess things up.
> As always, thanks for the feedback, everyone.
> Andy K0SM/VE3
> _______________________________________________
> RTTY mailing list
> RTTY@contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
>
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|