RTTY
[Top] [All Lists]

Re: [RTTY] MP issue

To: rtty@contesting.com
Subject: Re: [RTTY] MP issue
From: "Joe Subich, W4TV" <lists@subich.com>
Date: Sun, 27 Sep 2015 07:50:35 -0400
List-post: <rtty@contesting.com">mailto:rtty@contesting.com>

> Found no audio to MicroKeyer box on receive.

Original microKEYER or microKEYER II?

Check MMTTY's Soundcard tab and make sure you have selected "LINE"
on the sound card connected to microKEYER or "Line (microHAM CODEC)"
for microKEYER II.

found that I could decode if no headset plugged in. Plug in
headset...no decode.

Symptoms indicate you are decoding the audio from your microphone
(e.g. acoustic coupling from speaker to mic) which means the wrong
sound card input is selected.

73,

   ... Joe, W4TV


On 9/27/2015 12:57 AM, Dick Wilson wrote:
My 'old' MP has antenna relay issues. I plugged in a replacement MP.
I thought I got everything installed as on the old one.
Found no audio to MicroKeyer box on receive. Radio has plenty of
audio. After plugging & unplugging, found that I could decode if no
headset plugged in. Plug in headset...no decode.
I can transmit RTTY. Hesitate to mess with Com-ports as it seems to
be more or less OK.
Found nothing in Yaesu or MicroKeyer manual. I know I am probably
overlooking a relatively simple solution. Can someone give me a hint
on where to look, please?

TU & 73,

Dick K6LRN
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty

_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty

<Prev in Thread] Current Thread [Next in Thread>