The PC is 3Ghz. Windows 7/32 installed seamlessly.
Router only starts so slowly when the system has been restarted. Otherwise it
starts rapidly on successive program starts.
http://www.ve3vid.webs.com/
> Date: Fri, 15 Aug 2014 14:44:34 -0400
> From: lists@subich.com
> To: rtty@contesting.com
> Subject: Re: [RTTY] uHam & Win7 question
>
>
> > It also gives 7 banjo tones (audio acknowledgements) during start up.
>
> The audio tones indicate that Windows needs to *create* the virtual
> serial ports each time you start microHAM Router. That is abnormal
> and represents a problem in *your Windows installation*.
>
> Start-up time for a typical moderate system (2.1 GHz Core2Duo, 4 GB
> RAM) with all current Windows 7/64 updates is around 30 seconds and
> will vary depending on what other processes are running when Router
> is launched.
>
> 73,
>
> ... Joe, W4TV
>
>
> On 2014-08-15 11:12 AM, David VE3VID wrote:
> > Hello everyone
> > Since I installed Windows 7 on my PC microHAM Device Router functions
> > differently.
> > The program takes about 1 minute to start after clicking the program icon.
> > It also gives 7 banjo tones (audio acknowledgements) during start up. I
> > don't really care if this is the way the program runs under Win7 - it just
> > seems very odd.
> > Anybody else running uHAM Device Router also experience this?
> > regards & 73David
> > http://www.ve3vid.webs.com/
> >
> > _______________________________________________
> > RTTY mailing list
> > RTTY@contesting.com
> > http://lists.contesting.com/mailman/listinfo/rtty
> >
> _______________________________________________
> RTTY mailing list
> RTTY@contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|