This happened to me after installing the most recent N1MM update.
After doing the 800 x 600 trick, and relocating the window, I
switched back to native resolution. The next time I started
N1MM, all was ok. I think tomorrow's N1MM update is going to
make some more changes to the way the 2Tone/MMTTY windows start.
The guys on the N1MM Reflector probably know what's up.
Dave Hachadorian, K6LL
Yuma, AZ
-----Original Message-----
From: RLVZ@aol.com
Sent: Tuesday, February 25, 2014 3:13 PM
To: rtty@contesting.com
Subject: [RTTY] 2Tone text window not showing
Hi guys,
I have a problem finding the 2Tone Text Window on my Quad Core,
Windows 7
Pro, CPU with 24" LED monitor.
I'm running 2Tone along with MMTTY and N1MM Logger. When I
start
"Digital" or RTTY in N1MM Logger, both MMTTY windows
automatically appear on
screen, and the main 2Tone window appears, but the 2Tone Text
Window does not
appear anywhere on the screen, and it's not buried beneath
anything. Clicking
the 2Tone icon located on the lower task bar does not bring up
the 2Tone
text window. (as someone once told me it would)
The only way I'm able to display the 2Tone text window is to
select the
N1MM Logger: Config/Show All Windows 800x600". Doing this
re-arranges
everything on my screen which requires time to re-organize
everything, but then I
finally find the 2Tone Text Window.
I believe most people have their 2Tone text window show
automatically. A
friend just installed 2Tone and is having the same problem as
me, so I'm
not alone. Please advise what we're doing wrong?
Thanks!
Dick- K9OM
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|