> Now, to figure out how to configure and use fldigi. Did you say that
> there's a fldigi listserver?
Yes, but it's not one I frequent so not one I know off the top of my
head. Try Yahoo Groups and do a search for fldigi - probably something
like win-fldigi
73,
... Joe, W4TV
On 1/30/2014 8:31 PM, Lee wrote:
Yep, you're right, of course. Got it going after coming across menu 50B and
saw that the level was at 0. Turned it up and all is OK. Thanks for your help.
However, when the pinout description shows that pin 9 mutes the microphone
audio and pin 13 doesn't and since pin 11 is described as microphone audio
input you can see where my confusion came from. That's why I was questioning
your comments. No offense intended.
Now, to figure out how to configure and use fldigi. Did you say that there's a
fldigi listserver?
Joe Subich, W4TV <lists@subich.com> wrote ..
> That's not my understanding of the manuals description of the pinouts.
You have had two other TS-2000 users tell you that your understanding
is wrong. I support and distribute one of the most popular digital
interfaces and know how it must be connected to the TS-2000 in order
to work. After all the units in the field, I can tell you, pin 9
(PKS) select input audio on pin 11 (PKD) and pin 13 (SS) only allows
audio input from the mic connector.
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|