Yes but the monitor level function only works for voice mode, it has no effect
on cw or rtty sidetone levels. Until I discovered that there is indeed a
sidetone level adjustment for cw, I assumed that the levels were fixed. I
haven't yet played with the level adjustment for cw as it will entail a bit of
work just to gain access to the trimmer pot, hence the original question.There
is something to be said for the ability to readily access the back side of
one's radios. I wish the room were bigger to allow walk around access to the
rear of the desk.
Jim
On Sunday, January 12, 2014 3:39 PM, Jay WS7I <ws7ik7tj@gmail.com> wrote:
Doesn't the 1KMP have a monitor volume on the front panel like the FT2K ?
On 1/12/2014 1:36 PM, Jim Hoge wrote:
> Is it possible to adjust the sidetone level for rtty on the Yaesu FT-1000MP
> Mark-V? There is an adjustment for cw sidetone level on the back of the unit.
> I was wondering if this has any effect on the rtty sidetone level. The rtty
> sidetone has always been deafeningly loud with this radio.
>
> Tnx es 73,
> Jim W5QM
>
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|