Thanks to all who replied and offered suggestions. MIL connectors aren't cheap
to say the least. Hate to pay more for the connectors than for the machine!
But I will try the suggestions.
73 Jim N4BE
Sent from my iPad
Begin forwarded message:
> From: N4BE_Jim <N4BE_Jim@Yahoo.com>
> Date: December 26, 2013 at 10:57:11 PM EST
> To: "greenkeys@mailman.qth.net" <greenkeys@mailman.qth.net>
> Subject: AN/UGC-129 Restoration
>
> I am restoring one of these, actually it is the newer V1 version with the
> green lcd display.
> http://www.decadecounter.com/vta/articleview.php?item=1139. Got it for 80
> bucks on epay.
> I have it working after cleaning up a frozen print head movement motor and
> dot matrix print head pins. It prints quite nicely now.
>
> I am temporarily connecting power and data with pins inserted into the rear
> connectors, as I do not have the mating MIL connectors. Does anyone have any
> leads on these?
>
> Power Connector MS27484T12F98S with Clamp MS27506F12-2
> Data Connector MS27484T14F35PB, With same clamp.
>
> I have tried William Perry but have received no answer.
>
> Thanks,
> Jim N4BE
>
>
> Sent from my iPad
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|